 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier (supply voltage = device voltage, t a = +25 ? c, z 0 = 50 ? ) parameters units typical frequency mhz 40 170 240 470 860 1575 gain db 17.0 16.6 15.5 14.6 14.2 15.5 s11 db -11 -5 -4 -4 -10 -20 s22 db -20 -11 -10 -10 -10 -15 output ip3 1) dbm 20 1) 20 2) 18 2) 18 2) 20 2) 23 1) noise figure db 1.1 1.1 1.2 1.2 1.1 1.3 output p1db dbm 17.0 14.0 15.5 17.0 17.5 10.5 current ma 10 5 5 5 5 13 device voltage (v) v +3.3 +3.0 +3.0 +3.0 +3.0 +5.0 1) oip3 is measured with two tones at an output power of -5 dbm/tone separated by 1 mhz. 2) oip3 is measured with two tones at an output power of +0 dbm/tone separated by 1 mhz. parameters units min typ max testing frequency mhz 470 gain db 14.6 s11 db -4 s22 db -10 output ip3 dbm 18 noise figure db 1.2 output p1db dbm 17 current ma 5 device voltage (v) v +3 parameters rating operating case temperature -40 to ? 85 ? c storage temperature -40 to ? 150 ? c device voltage (v) +5.5 v operating junction temperature +150 ? c input rf power (cw, 50 ? matched)* +20 dbm * please find the max. input power data from http://www.asb.co.kr/pdf/maximum_input_power_analysis.pdf package style: sot-363 features description typical performance absolute maximum ratings ? 14.6 db gain at 470 mhz ? 17 dbm p1db at 470 mhz ? 18 dbm output ip3 at 470 mhz ? 1.2 db nf at 470 mhz ? mttf > 100 years ? single supply asl033 is a one-stage lna for mobile tv receiver low noise block. it has a low noise, high gain, and high linearity over a wide range of frequency up to 4 ghz. it is also suitable for use in the low noise am- plifier block of mobile wi reless systems. the ampli- fier is available in a sot363 package and passes the stringent dc, rf, and reliability tests. application circuit ? dvb-t (v, u band) ? dvb-t (v, u band) / contact esd +4 kv ? dvb, cmmb ? dvb-t (v, u band), 75 ? ? 10 ~ 88 mhz ? atsc (40 ~ 900 mhz) ? tetra ? 434 mhz ? 1450 ~ 1500 mhz ? gps product specifications package style: sot363 pin configuration pin no. function 1 rf in 4 rf out & bias 2,3,5,6 gnd
2/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier note : 1. the number and size of ground via holes in a circuit board is critical for thermal and rf grounding considerations. 2. we recommend that the gr ound via holes be placed on the bottom of lead pin 2 for better rf and thermal performance, as shown in the drawing at the left side. pin no. function pin no. function. 1 rf in 4 rf out & bias 2 gnd 5 gnd 3 gnd 6 gnd mounting recommendation (in mm) outline drawing symbols dimensions (in mm) min nom max a 0.90 1.00 1.10 a1 0.025 0.062 0.10 a2 0.875 0.937 1.00 b 0.20 0.30 0.40 c 0.10 0.125 0.15 d 1.90 2.00 2.10 f 1.15 1.25 1.35 e1 2.00 2.10 2.20 e -- 0.65bsc -- e1 -- 1.30bsc -- l -- 0.425ref -- esd classification hbm class 1a voltage level: 400 v mm class a voltage level: 50 v caution: esd-sensitive device! moisture sensitivity level (msl) level 3 at 260 ? c reflow esd classification & mois ture sensitivity level 3/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor application circuit frequency (mhz) 170 240 470 860 magnitude s21 (db) 20.2 19.6 18.4 16.6 magnitude s11 (db) -6 -7 -6 -6 magnitude s22 (db) -15 -8 -6 -6 output p1db (dbm) 15.0 16.5 17.5 17.5 output ip3 1) (dbm) 24 21 21 19 noise figure (db) 1.2 1.2 1.2 1.2 device voltage (v) +3.3 +3.3 +3.3 +3.3 current (ma) 10 10 10 10 dvb-t (v, u band) 170 ~ 860 mhz +3.3 v 0 200 400 600 800 1000 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s22 (db) frequency (mhz) l1=82 nh c2=15 pf rf out asl033 c1=100 pf rf in vcc=3.3 v r1=820 ? c3=1 ? f 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 4/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor application circuit frequency (mhz) 170 240 470 860 magnitude s21 (db) 21.0 20.6 19.0 16.8 magnitude s11 (db) -6 -5 -4 -4 magnitude s22 (db) -18 -9 -6 -6 output p1db (dbm) 14.5 16.0 17.5 17.5 output ip3 1) (dbm) 23 22 21 19 noise figure (db) 1.2 1.1 1.0 1.1 device voltage (v) +3.3 +3.3 +3.3 +3.3 current (ma) 10 10 10 10 dvb-t (v, u band) 170 ~ 860 mhz +3.3 v, contact esd +4 kv 0 200 400 600 800 1000 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 200 400 600 800 1000 0.0 0.5 1.0 1.5 2.0 2.5 3.0 nf (db) frequency (mhz) 5/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor application circuit frequency (mhz) 170 240 470 860 magnitude s21 (db) 16.6 15.5 14.6 14.2 magnitude s11 (db) -5 -4 -4 -10 magnitude s22 (db) -11 -10 -10 -10 output p1db (dbm) 14.0 15.5 17.0 17.5 output ip3 1) (dbm) 20 18 18 20 noise figure (db) 1.1 1.2 1.2 1.1 device voltage (v) +3 +3 +3 +3 current (ma) 5 5 5 5 dvb-t (v, u band) 170 ~ 860 mhz +3 v l1=82 nh c2=15 pf rf out asl033 c1=1000 pf rf in vcc=3 v r1=160 ? c3=1 ? f l2=10 nh 0 200 400 600 800 1000 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 6/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor application circuit frequency (mhz) 170 240 470 860 magnitude s21 (db) 17.8 16.9 15.7 14.3 magnitude s11 (db) -6 -5 -4 -5 magnitude s22 (db) -9 -5 -4 -4 output p1db (dbm) 15.5 16.5 17.5 17.5 output ip3 1) (dbm) 24 21 21 18 noise figure (db) 1.3 1.4 1.4 1.4 device voltage (v) +3 +3 +3 +3 current (ma) 5 5 5 5 dvb-t (v, u band) 170 ~ 860 mhz +3 v 0 200 400 600 800 1000 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) l1=82 nh c2=15 pf rf out asl033 c1=100 pf rf in vcc=3 v r1=820 ? c3=1 ? f 7/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 0 200 400 600 800 1000 0 5 10 15 20 gain (db) frequency (mhz) -40 o c 25 o c 85 o c 0 200 400 600 800 1000 -20 -15 -10 -5 0 s11 (db) frequency (mhz) -40 o c 25 o c 85 o c 0 200 400 600 800 1000 -20 -15 -10 -5 0 s22 (db) frequency (mhz) -40 o c 25 o c 85 o c 1) oip3 is measured with two tones at an output power of -5 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s parameters & k-factor (3.3v) application circuit frequency (mhz) 470 790 470 790 magnitude s21 (db) 15 14 17 16 magnitude s11 (db) -8 -8 -12 -12 magnitude s22 (db) -10 -10 -17 -14 output p1db (dbm) 18 18 18 18 output ip3 1) (dbm) 18 17 21 20 noise figure (db) 1.3 1.3 1.1 1.1 device voltage (v) +3.0 +3.0 +3.3 +3.3 current (ma) 5 5 10 10 dvb & cmmb 170 ~ 860 mhz +3 v, 3.3 v l1=82 nh c2=100 pf rf out asl033 c1=100 pf rf in vs=3.3 v r1=1 k ? c4=1 ? f l2=100 nh c3=0.1 ? f 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 8/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier -60 -40 -20 0 20 40 60 80 100 0 5 10 15 20 current (ma) temperature ( o c) -60 -40 -20 0 20 40 60 80 100 12 14 16 18 20 gain (db) temperature ( o c) frequency = 470 mhz -60 -40 -20 0 20 40 60 80 100 12 14 16 18 20 22 p1db (dbm) temperature ( o c) frequency = 470 mhz -60 -40 -20 0 20 40 60 80 100 14 16 18 20 22 24 26 output ip3 (dbm) temperature ( o c) frequency = 470 mhz -60 -40 -20 0 20 40 60 80 100 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 frequency = 470 mhz nf (db) temperature ( o c) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.0 0.5 1.0 1.5 2.0 nf (db) frequency (ghz) current vs. temperature gain vs. temperature p1db vs. temperature output ip3 vs. temperature nf vs. temperature nf vs. frequency 9/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sepa- rated by 6 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters (3.3v) application circuit dvb-t (v, u band) ( 75 ? ) 47 ~ 860 mhz +3.3 v frequency (mhz) 47 470 860 magnitude s21 (db) 20.5 19.0 17.5 magnitude s11 (db) -12 -13 -15 magnitude s22 (db) -7.5 -10 -15 output p1db (dbm) 17 17 17 output ip3 1) (dbm) 29.5 30.0 29.5 noise figure (db) 0.95 1.10 1.10 device voltage (v) +3.3 +3.3 +3.3 current (ma) 37 37 37 rf out asl033 rf in vs=3.3 v r1=1 k ? c4=1 ? f c3=0.1 ? f l1=1 ?? c1=1 ? f c2=1 ? f r1=91 k ? 0 200 400 600 800 1000 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 200 400 600 800 1000 0 1 2 3 4 5 stability factor frequency (mhz) 10/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone separated by 6 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters (3.3v) application circuit frequency (mhz) 170 240 470 860 170 240 470 860 magnitude s21 (db) 18.0 18.0 17.1 15.2 19.4 19.3 18.4 16.5 magnitude s11 (db) -14 -18 -14 -10 -18 -18 -13 -11 magnitude s22 (db) -18 -18 -15 -11 -15 -13 -13 -14 output p1db (dbm) 17 17 17 17 12 14 17 18 output ip3 1) (dbm) 17.0 18.0 19.5 22.0 19.5 21.0 23.5 25.5 noise figure (db) 1.2 1.2 1.1 1.1 1.1 1.1 1.1 1.1 device voltage (v) +3.3 +3.3 +3.3 +3.3 +3.6 +3.6 +3.6 +3.6 current (ma) 10 10 10 10 16 16 16 16 dvb-t (v, u band) ( 75 ? ) 170 ~ 860 mhz +3.3 v, 3.6 v l1=82 nh c2=100 pf rf out asl033 c1=100 pf rf in vcc=3.3 v r1=1.3 k ? c4=1 ? f l2=100 nh c3=0.1 ? f 0 200 400 600 800 1000 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 200 400 600 800 1000 -50 -40 -30 -20 -10 0 s12 [db] frequency [mhz] 11/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 0 250 500 750 1000 1250 1500 0 5 10 15 20 25 30 gain (db) frequency (mhz) 0 250 500 750 1000 1250 1500 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 250 500 750 1000 1250 1500 -30 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 0 1 2 3 4 5 6 7 8 9 10 stability factor frequency [mhz] . 1) oip3 is measured at an output power of +0dbm/tone separated by 6mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic application circuit s-parameters dvb ( 75 ? ) 400 ~ 1000 mhz +3.6 v frequency (mhz) 400 1000 noise figure (db) 1 1 magnitude s21 (db) 22 18 magnitude s11 (db) -10 -11 magnitude s22 (db) -18 -14 output p1db (dbm) 15 17 output ip3 1) (dbm) 24 29 device voltage (v) +3.6 current (ma) 16 12/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier rf out asl033 rf in vs r1=390 ? c4=1 ? f c3=1 ? f l1=39 n ? c1=100 pf c2=100 pf 900 1200 1500 1800 2100 0 5 10 15 20 gain (db ) frequency (mhz) 900 1200150018002100 -30 -25 -20 -15 -10 -5 0 5 s1 1 (db ) frequency (mhz) 900 1200150018002100 -30 -25 -20 -15 -10 -5 0 5 s2 2 (db ) frequency (mhz) 0 500 1000 1500 2000 2500 3000 0 1 2 3 4 5 stability factor frequency (mhz) 1) oip3 is measured with two tones at an output power of +0 dbm/tone separated by 6 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters (3.3v) application circuit frequency (mhz) 900 1500 2100 900 1500 2100 magnitude s21 (db) 13.0 11.9 10.2 14.3 13.1 11.4 magnitude s11 (db) -11 -16 -10 -10 -18 -12 magnitude s22 (db) -11 -14 -11 -14 -18 -12 output p1db (dbm) 17 13 14 16 10 12 output ip3 1) (dbm) 22 18 16 25 17 19 noise figure (db) 2.1 2.2 2.0 2.0 2.0 1.9 device voltage (v) +3.3 +3.3 +3.3 +3.6 +3.6 +3.6 current (ma) 10 10 10 16 16 16 smatv( 75 ? ) 900 ~ 2100 mhz +3.3 v, 3.6 v 13/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of ?5 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor frequency (mhz) 6 10 magnitude s21 (db) 18.3 18.2 magnitude s11 (db) -9 -9 magnitude s22 (db) -14 -14 output p1db (dbm) 17 17 output ip3 1) (dbm) 18.5 18.5 noise figure (db) - 1.45 device voltage (v) +3.3 +3.3 current (ma) 10 10 application circuit if 6 ~ 10 mhz +3.3 v rf out asl033 rf in vs=3.3 v r1=750 ? c4=1 ? f c3=1 ? f l1=27 ?? c1=1 ? f c2=1 ? f 0 1020304050 -30 -25 -20 -15 -10 -5 0 5 s11 (db) frequency (mhz) 0 1020304050 0 5 10 15 20 25 gain (db) frequency (mhz) 0 1020304050 -30 -25 -20 -15 -10 -5 0 5 s22 (db) frequency (mhz) 0 20406080100 0 1 2 3 4 5 stability factor frequency (mhz) 14/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of ?5 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor frequency (mhz) 10 88 magnitude s21 (db) 17.5 16.5 magnitude s11 (db) -11 -15 magnitude s22 (db) -18 -20 output p1db (dbm) 15.5 15.0 output ip3 1) (dbm) 18.5 17.5 noise figure (db) 1.6 1.4 device voltage (v) +3.3 +3.3 current (ma) 10 10 application circuit if 10 ~ 88 mhz +3.3 v rf out asl033 rf in vs=3.3 v r1=620 ? c4=1 ? f c3=1 ? f l1=10 ?? c1=1 ? f c2=1 ? f 0 20406080100 0 5 10 15 20 gain (db) frequency (mhz) 020406080100 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 20406080100 -30 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 15/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of -5 dbm/tone separated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s parameters & k-factor (3.3v) application circuit frequency (mhz) 40 450 900 40 450 900 magnitude s21 (db) 14.5 13.5 12.2 17.0 15.7 14.3 magnitude s11 (db) -8 -10 -11 -11 -15 -17 magnitude s22 (db) -12 -13 -10 -20 -20 -15 output p1db (dbm) 16.5 17.0 17.5 17.0 17.5 17.5 output ip3 1) (dbm) 19.0 18.5 16.5 19.5 20.0 18.5 noise figure (db) 1.3 1.5 1.5 1.1 1.2 1.2 device voltage (v) +3.0 +3.0 +3.0 +3.3 +3.3 +3.3 current (ma) 5 5 5 10 10 10 atsc 40 ~ 900 mhz +3 v, 3.3 v c2=10 nf rf out asl033 c1=10 nf rf in vs=3.3 v r1=680 ? c4=1 ? f c3=1 ? f l1=1.2 ?? 0 200 400 600 800 1000 0 5 10 15 20 gain (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 -25 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 16/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +10 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor (3.3v) frequency (mhz) 380 ~ 430 magnitude s21 (db) 20 21.5 magnitude s11 (db) -13 -14 magnitude s22 (db) -8 -11 output p1db (dbm) 18.5 18.0 output ip3 1) (dbm) 17.5 21.0 noise figure (db) 1.8 1.6 device voltage (v) +3.3 +3.6 current (ma) 10 14 application circuit tetra 380 ~ 430 mhz +3.3 v, 3.6 v rf out asl033 rf in c4=100 pf vcc=3.3 v c5=10 nf c2=100 pf c1=100 pf l1=47 nh c3=0.75 pf l2=39 nh 0 200 400 600 800 1000 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 17/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of -10 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor (3.3v) frequency (mhz) 434 magnitude s21 (db) 18.0 20.5 magnitude s11 (db) -12 -20 magnitude s22 (db) -6 -10 output p1db (dbm) 18 17 output ip3 1) (dbm) 13 16 noise figure (db) 1.6 1.5 device voltage (v) +3.0 +3.3 current (ma) 5 10 application circuit if 434 mhz +3 v, 3.3 v 0 200 400 600 800 1000 0 5 10 15 20 25 gain (db) frequency (mhz) 0 200 400 600 800 1000 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 0 200 400 600 800 1000 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) rf out asl033 rf in vcc=3.3 v c4=10 nf c2=100 pf c1=100 pf l1=39 nh c3=1.2 pf l2=39 nh 18/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of +0 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor (3.3v) frequency (mhz) 1450~1500 1450~1500 magnitude s21 (db) 15 16 magnitude s11 (db) -10 -18 magnitude s22 (db) -8 -11 output p1db (dbm) 17.5 18.0 output ip3 1) (dbm) 19.0 19.5 noise figure (db) 1.4 1.2 device voltage (v) +3.0 +3.3 current (ma) 5 10 application circuit gps,glonass,galileo&compass 1450 ~ 1500 mhz +3 v, 3.3 v rf out asl033 rf in c4=100 pf vcc=3.3 v c5=10 nf c2=100 pf c1=100 pf l1=8.2 nh c3=2.2 pf l2=5.6 nh 1000 1200 1400 1600 1800 2000 0 5 10 15 20 gain (db) frequency (mhz) 1000 1200 1400 1600 1800 2000 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 1000 1200 1400 1600 1800 2000 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 19/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 1) oip3 is measured with two tones at an output power of -5 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor frequency (mhz) 1575 magnitude s21 (db) 15.5 magnitude s11 (db) -20 magnitude s22 (db) -15 output p1db (dbm) 10.5 output ip3 1) (dbm) 22.5 noise figure (db) 1.3 device voltage (v) +5 current (ma) 13 application circuit gps 1575 mhz +5 v rf out asl033 rf in c4=100 pf vs=5 v c5=10 nf c2=100 pf c1=100 pf l1=6.8 nh c3=2.2 pf l2=4.7 nh r1=120 ? 1400 1450 1500 1550 1600 1650 1700 1750 1800 0 5 10 15 20 gain (db) frequency (mhz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -25 -20 -15 -10 -5 0 s11 (db) frequency (mhz) 1400 1450 1500 1550 1600 1650 1700 1750 1800 -20 -15 -10 -5 0 s22 (db) frequency (mhz) 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) 20/20 asb inc. ? sales@asb.co.kr ? tel: +82-42-528-7225 august 2013 asl033 5 ~ 4000 mhz mmic amplifier 2000 2200 2400 2600 2800 3000 0 5 10 15 20 25 gain (db) frequency (mhz) 2000 2200 2400 2600 2800 3000 -30 -25 -20 -15 -10 -5 0 5 s11 (db) frequency (mhz) 2000 2200 2400 2600 2800 3000 -30 -25 -20 -15 -10 -5 0 5 s22 (db) frequency (mhz) 1) oip3 is measured with two tones at an output power of +0 dbm/tone sepa- rated by 1 mhz. board layout (fr4, 40x40 mm 2 , 0.8t) schematic s-parameters & k-factor (3.3v) frequency (mhz) 2400 2500 magnitude s21 (db) 12.2 12.0 magnitude s11 (db) -18 -18 magnitude s22 (db) -10 -10 output p1db (dbm) 18 18 output ip3 1) (dbm) 21 21 noise figure (db) 1.15 1.15 device voltage (v) +3.3 +3.3 current (ma) 10 10 application circuit wlan 2400 ~ 2500 mhz 3.3 v 0 500 1000 1500 2000 2500 3000 3500 0 1 2 3 4 5 stability factor frequency (mhz) c1=100 pf c4=100 pf rf out asl033 rf in l2=47 nh vdd c3=10 nf l1=2.2 nh c5=100 pf c2=1 pf |
Price & Availability of ASL033-13
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |